Why use a strawberry tester?
Burs are tools we use daily during our pedicure treatments. We use these burs with our micromotors and turbines. It is essential to use high-quality burs to avoid damaging the equipment used, such as the handpiece or turbine.
Thanks to the milling cutter tester you can check the concentricity and proper alignment of the axis of your milling cutters to ensure their correct conformity.
A warped or damaged cutter will cause premature wear on your handpiece. To avoid irreparable damage to your handpiece and micromotor, check the shaft and its conformity. of your strawberry using a strawberry tester.
Step-by-step instructions for using your strawberry tester
Steps to test your strawberries :
1. Insert your milling cutter into the tester
2. If the cutter inserts easily, without needing to force it, then your cutter is compliant and usable.
3. If you have to apply pressure to insert the burr into the tester, we advise you to stop using that burr. It could damage your micromotor and handpiece.
It is very important to regularly check the condition of your milling cutters using a cutter tester. This can save you significant costs due to damage to the handpiece or micromotor.
